AUDIO 2000'S VHF WIRELESS MICROPHONE SYSTEM

The Audio2000'S^® AWM6112 Plug-In-N-Recharge^TM VHF dual channel wireless microphone system is a wireless microphone system with the recharge mechanism right on the top of the receiver (AWR6112) and on the microphone (AWX6112).   Intended to be a solution provider for various application environment, the AWM6112 system is developed to provide the following benefits to the users:

Friendliness:	The Plug-In-N-RechargeTM feature, with the recharge mechanism built right on the microphone and the receiver, makes the wireless microphone systems ready to be used at any time.  A rack-mount kit is included such that the AWM6112 is rack mountable.
Dependability:	The AWM6112 system has been designed and manufactured to be dependable, problem free, versatile and easy to use.
Portability:	The color cardboard box is designed to be carried easily and is, hence, highly portable.
Quality:	The AWM6112 system has been engineered to have a wide audio frequency range, high S/N ratio, and outstanding performance. Three NiMH AA rechargeable batteries are used for each handheld microphone to avoid the traditional NiCd battery memory problems.
Affordability:	The AWM6112 system is intended to be readily accessible to everyone with exceptional performance at a preferred and affordable price.

APPLICATIONS

Disc jockey (DJ); karaoke jockey (KJ); church; school; karaoke; home entertainment

 

AWR6112 RECEIVER

FEATURES

* VHF Band Frequency
* Recharge Mechanism Built-in on the Receiver
* Balanced and Unbalanced Audio Outputs
* Full Rack Case with Power and RF Indicators
* Fluorescence Display
* RF Input with Built-in RF Preamplifier to Improve S/N Ratio, Sensitivity and Dynamic Range
* Low Noise Mixer Circuitry for Reducing interference
* 120V-240V AC Power Supply

FRONT PANEL FUNCTIONS

1. Power On/Off Switch 2. Channel 1 Volume Level Control 3. Channel 1 Recharge LED Indicator

4. Fluorescence Display 5. Channel 2 Volume Level Control 6. Channel 2 Recharge LED Indicator

 REAR PANEL FUNCTIONS

1. Channel 2 Antenna 2. Unbalanced Mixed Audio Output (1/4 Jack) 3. Balanced Mixed Audio Output (XLRM Jack)

4. Channel 1 Antenna 5. AC Power Cord 6. 120V / 240V Voltage Selection Switch

 SPECIFICATIONS

Carrier Frequency Range	VHF Band
Frequency Stability	0.005%
Receiving Sensitivity	97 dBm
S/N Ratio	70dB
T.H.D.	< 1%
Audio Output	and XLR (0 500mV @ 4.7Kohms)
Dimensions (W X H X D)	12.8 X 2.1 X 7.9 (326 X 53 X 200 mm)

 

AWX6112 TRANSMITTER

FEATURES

* VHF Band Frequency * Recharge Mechanism at the Base of the Handheld Microphone * High Sensitivity Cardioid Microphone Capsule * Noise Reduction Mechanism for Eliminating Handling Noise and Switch Shock Noise * Low Battery LED Indicator

 SPECIFICATIONS

TRANSMITTER

Carrier Frequency Range	VHF Band
Frequency Stability	0.005%
Modulation	Frequency Modulation (FM)
Modulation Depth	30KHz
Output Power	30mW, Max
Harmonic Suppression	40dB
Battery	AA Batteries X 3  (1.5V X 3)
Current Consumption	<85 mA

 

 SYSTEM 

Carrier Frequency Range	VHF Band
Frequency Stability	0.005%
Audio Frequency Response	80 15,000Hz
Image and Spurious Rejection	45dB Minimum
S/N Ratio	> 75dB
Max. SPL	>100dB
T.H.D.	< 1%
Service Area	100 ft (30 M)
Operation Temperature	14 F - 122 F (-10 C +50 C)

 

 

SYSTEM OPERATION

1. Fully extend the antennas and set them at an angle perpendicular to the floor to achieve the best RF reception.

2. Connect the AWR6112 receiver AC input to an AC power source via an AC cord..

3. Connect the AWR6112 receiver audio output to the microphone input of a mixer via a cable.  (Note: There are two outputs: one unbalanced mixed output and one balanced mixed output.)

4. Place three rechargeable AA batteries into the battery housing of each of the AWX6112 microphones with the battery polarity oriented as indicated. If the batteries need to be recharged, insert the AWX6112 microphones (with the recharge contacts facing downwards) onto the recharge sockets on the AWR6112 receiver. (Note: Never recharge any battery that is not made to be rechargeable.)  The recharge LED indicators will turn red when the batteries are being recharged. After the batteries are fully charged, the recharge LED indicators will turn yellow.

5. Turn on the power of the AWR6112 receiver. After the power of the AWR6112 is turned on, the fluorescence display will be turned on showing the volume control levels of channel 1 and channel 2.

6. Turn on the On/Off switch on each of the AWX6112 microphones. The low battery LED indicator will blink once and then stay off while the Normal Power LED indicator will then be turned on. If the low battery LED indicator stays on, recharge the rechargeable AA batteries in the AWX6112.

7. Once the AWX6112 microphones are turned on, the audio levels, channel numbers and the corresponding frequencies on the fluorescence display will be on to show the reception statuses.

8. Adjust the volume control knobs to have an optimal sound quality.

OPERATION NOTES

1. The brand new rechargeable AA batteries for the handheld microphones need to be charged before use.

2. The AWX6112 handheld microphones need to be turned off before changing the batteries.

3. Signal dropout or unexpected noise may be caused by a low battery or by an excessive distance between the microphone and the receiver.  If you encounter signal dropout or unexpected noise, please check the batteries first.  If batteries are still fresh, try to readjust the antennas on the AWR6112 receiver.

4. Do not drop the microphone on the floor or strike the microphone with any object.

5. Always turn off the microphones and remove the batteries if the microphones are not to be used for a period of time to prevent the microphone from being damaged by a leaking battery.

6. Avoid placing the receiver in a corner to prevent any RF reception deterioration.

7. Try to place the receiver as far away from any digital equipment, including computers and some CD players, as possible.